The new Intel Android* USB Driver package 1. 9.0 is available for download at the Intel Developer Zone. It enables you to connect your Windows*-based machine to your Android* device that contains an Intel® Atom™ processor inside. This includes the latest Intel® Atom™ x3 and x5 processor families and supported host systems with Windows* 8.1 (32/64-bit) and Android devices including those with Android* 4.4 – Kit Kat and Android* 5.x – Lollipop.
USB drivers for Android devices are platform-specific, and there is no guarantee that this Intel USB driver will work for every OEM device. Since most OEMs develop the USB driver for all devices that they sell, we recommend that you also check out the Android* OEM USB driver page that lists the OEM drivers.
For most devices, the Ports device setup class and the Serial function driver provide the functionality required to operate serial ports and COM ports. To install serial ports and COM ports using these system-supplied components, do the following: Provide an INF file that specifies the Ports device setup class and the Serial function driver as the service for the port. However, if the computer displays messages about connecting a USB 2.0 or 3.0 device into a higher speed USB port and you know a USB 2.0 or 3.0 port is on the computer, the USB controller drivers might need upgrading. Use Device Manager to get any available updates for Windows 7 or later. I tried to find my phone in Device Manger, it is not under 'Portable Devices' but 'Other Devices'. No 'MTP USB Device' option!!! I tried to find wpdmtp.inf in Windows/INF dir = missing I tried to transfer wpdmtp.inf from another working computer = Third party signature, not allowed to install. In most cases an Ethernet port that is configured as an EtherCAT device will not transport general IP packets. For this reason and in cases where an EL6601 or similar devices are used it is useful to specify a fixed IP address for this port via the 'Internet Protocol TCP/IP' driver setting and to disable DHCP. If you are writing a device driver, the USBView tool might be more useful for verifying the bus speed. The tool is included in the Windows Driver Kit (WDK) 8 Release Preview (RP), which is available for download at this Web site. USBView in this release has been updated to display SuperSpeed information.
This installation instructions document will guide you through installing the Intel® Android* USB Driver package which will enable you to connect your Windows* based machine to your Android device that contains an Intel® Atom™ processor inside.
Supported USB profiles
After installing the USB driver package, plug in your Android* device to your computer using your micro-USB to USB cable. The following are the supported USB profiles via the Intel Android USB Driver package:
- ADB (Android Debug Bridge): This is the debug interface of Android. It is mandatory to use in order to re-flash, and debug.
- MTP (Media Transfer Protocol): This is the Windows* protocol to facilitate the transfer of media files.
- PTP (Picture Transfer Protocol): This is the Windows* protocol to allow the transfer of images from digital cameras to computers.
- RNDIS: This provides a virtual Ethernet link using phone network.
- CDC Serial (Modem AT Proxy): This provides the link to Modem to allow to use AT commands through a virtual com port.
Troubleshooting Errors
Device is not recognized at all
These drivers are only for Intel® devices. If you're using a device from one of our OEM, please get the drivers directly from their web site, or you can use this list of drivers on the Android* site.
Einstruction Port Devices Driver Windows 10
Errors in the Windows* Device Manager
Open Windows Device Manager:
- If USB Mass Storage is visible instead of ADB Device, then right click on the Mass Storage device icon and select ‘Uninstall'.
Then unplug your device from the computer and install drivers' setup again. - If Android Device is visible with a yellow warning icon, then right click on the Android Device icon and select ‘Uninstall'.
Then unplug your device from the computer and install drivers' setup again.
Portable Device but no Android Debug Bridge (ADB) profile
There may not be an enabled 'USB Debugging' option. The developer options on a phone are hidden by default. Open the settings on a phone, and find the About section. Look through it until the 'Build number' entry is visible. Tap if five times in quick succession, and there should be a small dialog stating it's now set to developer. Come back to Settings main menu and go into Developer Options, then enable USB Debugging.
Einstruction Port Devices Driver Download
Windows XP: When I activate MTP there is no pop-up to allow me to access phone file system or transfer media files.
MTP is not supported by default with Windows XP. You have to install Windows Media Player 10 or later.
Further Questions & Support
Einstruction Port Devices Drivers
For other troubleshooting support, post questions on the Forum for Android* Applications on Intel® Architecture
